STEEL GRIT

STEEL GRIT

A cast steel angular grit is produced by crushing specially heat treated oversize shot pellets. It is utilised for blast cleaning or surface preparation.

GP STEEL GRIT

Quenched and tempered, angular when new, this grit rapidly rounds off in use and is particularly suited to descaling applications.

GL STEEL GRIT

Quenched and tempered, although harder than GP steel grit, GL also loses its sharp edges during shot blasting and is particularly suited to descaling and surface preparation applications.

GH STEEL GRIT

Quenched with maximum hardness, GH always remains angular in its operating mix. These abrasives are particularly effective in surface treatment processes and produce a uniform, etched finish.
For use mainly with compressed air equipment.

Profilium

Ready-to-use operating mix for surface preparation in manual blasting.
PROFILIUM® is very hard steel grit, developed specially for manual blasting applications. As the grain size distribution of the new product is that of a ready-to-use operating mix, the frequency and quantity of abrasive additions will have little or no effect on the profile result: a constant surface profile is obtained. In terms of efficiency, PROFILIUM® has no rival on the market.